GOLDTEC HUBS AND WHEELS

We manufacture hubs in our factory for almost every discipline of cycling. From lightweight xc non dics hubs to very strong DH hubs. Our new range of Pro Competion xc hubs are very light, but are very strong as they use the same internal drive mechanism as the DH hubs. The rear hub is 285grams and the front is 150grams. They can be built onto Stan's rims so that you can run the wheels tubeless again using the Stan's tubeless milk, tape and valves.

Goldtec Track Hubs The VERY popular double sided flip flop hub used for many types of riding from London couriers to Velodrome track racing. MORE INFO>>

Goldtec Road Hubs New range for 08 onwards. Light and durable. Built using the knowledge we have gained from working with British Cyling in developing parts for the successful Olympic track team. Our Road hubs. MORE INFO>>

Goldtec 15mm All Mountain front hub The all new specifically designed front hub. It is not just a hub that has had new spacers made to convert to 15mm. It is a completely new hub specifically designed for XC and enduro riding with the Fox 15mm option forks. MORE INFO>>

Goldtec Pro Competition Rear Hub Our New Goldtec Pro Competition Hub aimed at XC racing and endurance riding. Weighs only 285 grams MORE INFO>>

Goldtec pro competition xc/trials disc hub This hub is incredibly light only 150 grams for a front disc hub. Used by many top weight weenies in xc and trials. MORE INFO>>

Goldtec Draco Front Hub The Draco front hub is compatable with all disc's. Can be used on 20mm bolt through or QR, by using either spacers or QR axle. These can be purchased seperately. MORE INFO>>

Goldtec Xc Front Disc Hub XC disc hub, strong enough for freeriding and light enough for xc. Only 180 grams, lighter than most xc hubs. MORE INFO>>

Goldtec Draco Rear Hub Rear Draco Hub, can be supplied in 135mm, 150mm or 160mm spacing. It can also be used 12mm or QR. We also make conversion kit's for the 20mm hubs used on the YETI DH9 and the Tomac frames. MORE INFO>>

Goldtec Singlespeed Disc Rear Hub This singlespeed cassette hub uses the same quick pickup drive principle as all our rear cassette hubs. MORE INFO>>

Goldtec Touring hubs Goldtec touring hubs are made from aircraft grade alloy. The rear hub uses the same drive mechanism as the Sam hubs and is lubricated via the oil port. There is a disc option avaiable for both the front and rear hub MORE INFO>>

Goldtec Sam Rear Hub The Sam hub is no longer in production. We do still carry some spares. Oil and syringes can be purchased from the site MORE INFO>>

Draco QR axle or 20mm Spacers MORE INFO>>

Axle Conversion for Goldtec Draco Rear This axle converts the 12mm axle into a qr MORE INFO>>