Shock Bush Tool

 

This tool makes taking the old bush out and fitting a new shock eye bush a walk in the park. Comes with a new bush to fit into your shock eyelet. (not the reducer)

Selecting the needle roller bearing tool, you will also receive a 1/2” tool to remove the 1/2” eyelet as well as the tool to insert the bush

If you order the Needle roller bearing,the bearing must be ordered seperatley.

Sizes are as follows

Fox = 12.7mm or 1/2″ in old money

Manitou = 12.0mm

Rock Shox = 10mm – these are for the very old Rock Shox and NOT modern shock units which are the same as Fox now being 12.7mm